Replacing The Light Bulbs - GE 18 Owner's Manual And Installation Instructions

Preparing for Vacation
For long vacations or absences, remove
food and unplug the refrigerator. Move
the control to the OFF position, and clean
the interior with a baking soda solution
of one tablespoon (15 ml) of baking soda
to one quart (1 l) of water. Leave the
doors open.
Preparing to Move
Secure all loose items such as grille,
shelves and drawers by taping them
securely in place to prevent damage.

Replacing the Light Bulbs

To replace a burned-out bulb, unplug the
refrigerator from its electrical outlet.
In the refrigerator compartment, remove the
lens cover by gently applying pressure to two
areas as shown and pull the cover free from
the light housing. Unscrew the bulb when
cool and replace it with an appliance bulb
of the same or lower wattage.
There is also a light in the refrigerator
control panel. To replace it, simply unscrew
the bulb when cool and replace it with an
appliance bulb of the same or lower
wattage.
www.GEAppliances.com
If an icemaker is installed, move the
icemaker feeler arm to the STOP (up)
position and shut off the water supply
to the refrigerator.
Be sure the refrigerator stays in an upright
position during moving.
In the freezer compartment, simply unscrew
and replace the bulb after ensuring the
refrigerator is unplugged.
Turning the control to the OFF position does not
remove power to the light circuit.
11