iSmartAlarm Home Security System Owner's Manual page 6

1. 10/100 BASE-T Ethernet: for connecting to router
2. USB: a port for future function expansion (not for connecting to
computer directly)
3. Power: for connecting to power adaptor
LED statuses of CubeOne™
1. Booting: LED stays solid red.
2. Normal working status: LED flashes white, "breathing" when siren is
off; LED flashes red when siren is on.
3. Disarming: LED light changes from red flashing to white "breathing"
when disarming.
4. CubeOne™ registration: LED alternates between red and white
during registration.
5. Devices registration: LED flashes white "breathing".
6. Communication error : LED stays red.
Motion sensor:
How to change battery:
1. Unscrew and take off the back lid.
1 2 3
4