Adding Additional Devices After The Installation; App - Basic Walkthrough - iSmartAlarm Home Security System Owner's Manual

ADDING ADDITIONAL DEVICES AFTER THE
INSTALLATION
1. Remove the insulation tags from new devices.
2. Launch iSmartAlarm app and go to the Monitor page.
3. Select the Safety Monitor tab.
4. Pull the Safety Monitor page down to view the "Add Devices "
button.
5. Press the "Add Devices" button to start the adding device process.
6. After the devices are found, press the "Add" button to add them to
the system.
APP – BASIC WALKTHROUGH
Upon download and installation of App on your phone, you will be
required to complete some basic necessary steps to begin using your
iSmartAlarm. The basic overview of steps are as follow:
1. Sign up with accurate information. Please
ensure that you provide your phone number
which will be used as the alert phone number
when the system is set off.
14