iSmartAlarm CubeOne Quick Installation Manual

Hide thumbs Also See for CubeOne:

Available languages

Download this manual See also: Owner's Manual

Quick Installation Guide

Get Started

Easy as One, Two, Three

Step 1 – Getting Started

•

Download the "iSmartAlarm Home Security System" application from your phone's App

store.

•

Connect the CubeOne™ to your router and into your wall outlet according to the picture

provided below.

•

Power on the CubeOne™ and wait for the booting process to finish (it will automatically

boot, and should take 1-2 minutes).

You will know the booting process is finished when the CubeOne's white LED light

"breathes" (i.e. flashes slowly)

(bottom)

power adapter

router

(not included)

WAN

Need help?

Do you have a question about the CubeOne and is the answer not in the manual?

Page 1 Download the “iSmartAlarm Home Security System” application from your phone’s App store. Quick Installation Guide • Connect the CubeOne™ to your router and into your wall outlet according to the picture provided below. • Power on the CubeOne™ and wait for the booting process to finish (it will automatically boot, and should take 1-2 minutes).
Page 2: Motion Sensor
Remove the insulation tags from the battery compartments of contact sensors, remote tags, and motion sensors. • Launch the iSmartAlarm App, and follow the on-screen instructions for user registration and CubeOne™/devices registrations. Approx. Ensure that your phone's SMS service is active in order to get the verification code during user registration.
Page 3 à partir de l'App Store. Guide d'installation rapide • Connectez le CubeOne™ à votre routeur et à votre prise électrique murale comme illustré ci-dessous. • Mettez le CubeOne™ sous tension et patientez jusqu'à la fin du processus d'amorçage (celui-ci est automatique et devrait durer de 1 à...
Page 4 Assurez-vous d'avoir reçu l'appel téléphonique d'essai (effectué automatiquement par iSmartAlarm au cours de la procédure d'installation, si applicable dans votre région). Assurez-vous que tous les appareils sont enregistrés et apparaissent dans les capteur de paramètres des appareils de l'application.