iSmartAlarm Home Security System Owner's Manual page 12

Remote Tag
• Remote Tag can be used for arming and disarming of the system and
set off the siren manually. The Remote Tag can also activate the
"Home" setting.
• Remote Tag can be used as a presence indicator if the Remote Tag
holder is at home and can be "assigned" to individual users.
What happens when...
The alarm is triggered while system is armed or set to Home:
• The siren begins to go off.
• If phone alert is supported in your area, up to three allowed users
receive an alert phone call regarding the nature of the alert. Listen to
the message to determine next appropriate actions.
• If a user does not answer, a voicemail is left in the user's voicemail
box.
• A push notification is sent through the App to all members in the
home security group.
•The Superuser receives a snapshot taken by an iCamera from the
preset angle through the iSmartAlarm App (Only applicable if
iCamera is part of system).
•The Superuser is given the option to call an emergency agent or
ignore the alarm (Only applicable if iCamera is part of system).
• Device activities are stored to the cloud for 90 days. Users can
access devices' log through their iSmartAlarm App.
• Remote Tags can be used to disarm the system on site by simply
clicking the "disarm" button.
The system is disarmed but activity in the home occurs:
• The user can designate varying degrees of notification for different
activities, even when the system is disarmed including, but not limited
10