Table of Contents
Advertisement
After selecting to use the DHCP Connection (Dynamic IP Address) connection
method, the following page will be available. In this section, we can configure the
following:
MAC Address: Enter the MAC address used for the Internet connection here.
Alternatively, click the Clone Your PC's MAC Address button to use the PC's
MAC address that was originally used to connect to the Internet before the
purchase of this router.
Host Name: Enter the host name used for the Internet connection here.
Primary DNS Address: Enter the primary DNS IP address here.
Secondary DNS Address: Enter the secondary DNS IP address here. This field is
optional.
Note: This information is usually supplied by the ISP.
Click the Next button to continue to the next step.
Click the Prev button to return to the previous step.
Click the Cancel button to discard the changes made and return to the main menu.
After selecting to use the Username/Password Connection (PPPoE) connection
method, the following page will be available. In this section, we can configure the
following:
User Name: Enter the PPPoE username here.
Password: Enter the PPPoE password here.
Note: This information is usually supplied by the Internet Service Provider (ISP).
Click the Next button to continue to the next step.
Click the Prev button to return to the previous step.
Click the Cancel button to discard the changes made and return to the main menu.
Web User Interface Configuration
Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Page 28
Hide quick links:
Advertisement
Table of Contents
