Features & Specifications - Lopi Freedom Bay Fireplace Insert Owner's Manual

6
Installation Options:
 Masonry Fireplace Insert
WARNING: Do not install this fireplace insert into
a factory-built metal (Z.C.) fireplace.
Heating Specifications:
Approximate Maximum Heating Capacity (in square feet)*
Maximum BTUs per Hour (Cord Wood Calculation)
Overall Efficiency (Oregon Method)
Maximum Burn Time
* Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside
temperature. It is also affected by the quality and moisture level of the fuel.
Dimensions:
Measure side clearances
from the side of the insert.
Measure top
clearances from
the top plate.
Emissions:
2.6 Grams Per Hour (EPA Phase II Approved) – Tests conducted by E.E.S.P.C.
© Travis Industries
Features & Specifications
6" Diameter Flue
20-1/4"
43-3/4"
Measure front clearances
from the faceplate.
Features:
 EPA Phase II Approved
 3.1 Cubic Foot (.088 m
 Single Operating Control
 Accepts Logs Up to 24" (610mm) Long
 Steel Plate Construction (5/16" & 3/16") (8mm
& 5mm)
 Heavy Duty Refractory Firebrick
 High-Tech Blower
29-1/4"
5-5/8"
4-3/4"
Faceplate
100-01163
3
) Firebox Volume
1,200 to 2,250 (112 M
74,300
70 %
Up to 12 Hours
Weight = 470 Lbs.
21-3/4"
Electrical Line (may
be attached to the
opposite side)
15-3/4"
Fireplace Opening
2 2
to 209 M )
Figure 1
4041129