Baffle Removal & Replacement; Air Tube Removal & Replacement - Lopi Freedom Bay Fireplace Insert Owner's Manual

Baffle Removal & Replacement
1 Lift up on the front portion of the front three firebricks.
2 Lift the front baffle support "Y" and rotate it forward until it can be removed.
3 Slide the center front firebrick forward and out the door opening. Then slide the side front
firebricks towards the middle then out in the same manner.
4 Slide the center baffle support forward and out of the firebox.
5 Slide the rear firebrick forward and out of the firebox.
NOTE: When the center rear firebrick are slid forward the damper plate will come to rest on the
rear secondary air tube and rear air channel.
6 Slide the damper slider all the way forward.
7 Reach into the firebox and push up on the damper yoke until the damper yoke separates from the
damper slider. Remove both the damper slider and damper plate by sliding them between the
front two secondary air tubes.
REPLACEMENT INSTRUCTIONS:
1 Place the damper plate above the secondary air tubes in the rear center of the firebox.
2 Position the damper slider so the damper yoke inserts into the two tubes on the damper slider
(make sure to have correct orientation). Then slide the damper slider over the damper plate until
both are centered in the firebox.
3 Follow the instructions above in reverse order, starting with step number 5.
Air Tube Removal & Replacement
Air Tube
© Travis Industries
Maintaining Your Appliance
Air Tube Collar
100-01163
Remove the left pin on the air tube collar
a
Roll Pin
Slide the air tube to the left, swing it
b
down and remove from the firebox.
27
4041129