Inspect Shipment; Dimensions - Morton System Saver M20 Installation And Operation Manual

The parts required to assemble and install the unit are
included in a bag. Thoroughly check the water soften-
er for possible shipping damage and parts loss. Also
inspect and note any damage to the shipping carton.
Bypass Valve
Hose Clamps
If you have any questions, or there are missing parts or damage, please call Toll Free 1-888-64 WATER
(1-888-649-2837) Monday - Friday, 8 am - 7 pm EST.
When you call, please be prepared to provide the model and serial number of your product, found on the
rating decal, located on the rim below the salt lid hinges.
For more installation or service information, visit www.systemsaver.com.
4

Inspect Shipment

20 ft. Drain Hose
Adaptor Elbow
Do not return the water softener to store.
20-5/8"
IN
3-3/8"
OUT
TOP VIEW
IN - OUT
37"
SIDE VIEW
Morton System Saver
®
Remove and discard (or recycle) all packing materials.
To avoid loss of small parts, we suggest you keep the
small parts in the parts bag until you are ready to use
them.
Packing List
Installation
Adaptors
Grommet

Dimensions

17-1/4"
FRONT VIEW
Installation & Operation Manual
®
Clips
(including 1 spare)
FIG. 1
42-3/4"
FIG. 2