IP Camera 200 Series
3.3
Network (and power) connector
RJ45
Ethernet (PoE)
Figure 3.2 Network connection
–
–
–
CAUTION!
This equipment is only to be connected to PoE networks
without routing to outside plant.
Bosch Security Systems
Connect the camera to a 10/100 Base-T network.
Use a shielded UTP Category 5e cable with RJ45
connectors.
Power can be supplied to the camera via the Ethernet
cable compliant with the Power-over-Ethernet
(IEEE 802.3af) standard.
Installation and Operation Manual
Installation | en
AR18-10-B012 | v1.5 | 2011.01
17