Browser Connection; System Requirements; Establishing The Connection - Bosch NTC-255-PI Installation And Operation Manual

IP Camera 200 Series
4

Browser connection

A computer with Microsoft Internet Explorer can be used to
receive live images from the camera, control cameras, and
replay stored sequences. The camera is configured over the
network using a browser or via the Bosch Video Client
(supplied with the product).
4.1

System requirements

–
–
–
The Web browser must be configured to enable Cookies to be
set from the IP address of the unit.
In Windows Vista, deactivate protected mode on the Security
tab under Internet Options.
To play back live video images, an appropriate ActiveX must be
installed on the computer. If necessary, the required software
and controls can be installed from the product CD provided.
4.2

Establishing the connection

The camera must be assigned a valid IP address to operate on
your network. The default address pre-set at the factory is
192.168.0.1
1.
2.
Bosch Security Systems
Microsoft Internet Explorer version 7.0 or higher
Monitor: resolution at least 1024 × 768 pixels, 16 or 32 bit
color depth
Intranet or Internet network access
a. Insert the CD into the CD-ROM drive of the computer.
If the CD does not start automatically, open the root
directory of the CD in Windows Explorer and double
click BVC-installer.exe
b. Follow the on-screen instructions.
Start the Web browser.
Enter the IP address of the camera as the URL.
Installation and Operation Manual
Browser connection | en
AR18-10-B012 | v1.5 | 2011.01
25