E-series High-definition Camera· User Manual
2.4 Installation of DS-2CE1512P(N)-IR and
DS-2CE1582P(N)-IR Bullet Camera
Steps:
1.
Place the drill template on the wall/ceiling and mark screw positions.
2.
Route the cables inside the ceiling or on the surface. If you want to route the
cables inside the ceiling, drill the cable hole with the drill template in the
ceiling for wiring; pull all cables through the hole and terminate all wires (if
not already terminated).
3.
Connect the video cable and power cable and use the screws to secure the
mounting base with camera.
Mounting base
Figure 2-24 Overview
25
Power cable
Video cable