Hardware Options Installation; Introduction; Hard Drive Option - HP BL260c User Manual

Hardware options installation

Introduction

If more than one option is being installed, read the installation instructions for all the hardware options
and identify similar steps to streamline the installation process.
WARNING:
internal system components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause electrostatic discharge.

Hard drive option

WARNING:
internal system components to cool before touching them.
To install the component:
Power down the server blade (on page 10).
1.
Remove the server blade (on page 11).
2.
Remove the access panel (on page 11).
3.
Disconnect the hard drive cable power and data cable from the system board.
4.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server before
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Hardware options installation 17