Getsnapconfig; Setsnapconfig - Foscam IP Camera User Manual

The video region is divided into 10*10 sub areas, bit0 above present the first area, when
this bit is set to "1", it means motion detection is effective on this area.

getSnapConfig

Function
Get snap config
privilege visitor
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getSnapSetting
Param
None
snapPicQuality
Return
saveLocation
Note
Example /cgi-bin/CGIProxy.fcgi?cmd=getSnapConfig&usr=admin&pwd=

setSnapConfig

Function
Set snap config
privilege admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=setSnapSetting
snapPicQuality
Param
saveLocation
Return
None
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=setSnapConfig&usr=admin&pwd=&
ty=1&saveLocation=2
Copyright@ Shenzhen Foscam Intelligent Technology Limited
Foscam IPCamera CGI User Guide
0 Low quality
1 Normal quality
2 High quality
0 Save to sd card
1 Not in use now
2 Upload to FTP
0 Low quality
1 Normal quality
2 High quality
0 Save to sd card
1 Not in use now
2 Upload to FTP
area8
area9
snapPicQuali
12