Setipinfo; Refreshwifilist; Getwifilist - Foscam IP Camera User Manual

setIpInfo

Function
Set IP Info
privilege admin
Usage /cgi-bin/CGIProxy.fcgi?cmd=setIpInfo
Param
isDHCP
ip
gate
mask
dns1
dns2
Return None
Note
System will
Example /cgi-bin/CGIProxy.fcgi?cmd=setIpInfo&isDHCP=0&ip=192.168.1.88&gate=192
.168.1.1&mask=255.255.255.0&dns1=192.168.1.1&dns2=192.168.1.1&usr=a
dmin&pwd=

refreshWifiList

Function
Start scan the aps around
privilege admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=refreshWifiList
Param
None
Return
None
Note
This operation may takes a while, about 20 seconds or above, the other
operation on this device will be blocked during the period.
Example
/cgi-bin/CGIProxy.fcgi?cmd=refreshWifiList&usr=admin&pwd=

getWifiList

Function Get the aps around after refreshWifiList
privilege admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getWifiList
Param
startNo
Return
totalCnt
Copyright@ Shenzhen Foscam Intelligent Technology Limited
Obtain ip from dhcp server or not
ip address(Can only support ipv4 yet)
gateway
subnet mask
The first dns server addr
The second dns server addr
reboot automatically to take effect after call this CGI command
The start NO of the ap list you want to get.
For example:The are 30 aps around you, you want to look at the
last ten aps, then startNo=20
Total count of aps
Foscam IPCamera CGI User Guide
32