Removing A Card On A Macintosh - Dazzle Universal 3 in 1 Reader/Writer User Manual

Removing a Card on a Macintosh

Before you remove a digital media card, make sure that the Access Indicator at the front
of the 3 in 1 Reader/Writer is not flashing. The Indicator flashes when the 3 in 1 Reader/
Writer is reading or writing data on a card. Please wait until the read/write operations are
complete and the Indicator stops flashing before you remove a card. Removing a card dur-
ing read/write access causes lost or corrupted data.
1. To remove a card, drag the card icon and drop it onto the trash icon.
Note: The icons below and their desktop locations differ slightly for Mac OS 10.1.2 and
higher.
The card icon disappears from the desktop. A dialog box similar to the one below appears.
It is now safe to remove the card.
Note: The dialog box below does not appear in Mac 0S 10 and higher.
2. Click OK in the dialog box, then grasp the end of the card with your thumb and index
fingers, and remove it from the slot.
Caution: Do not remove a mounted card without first dragging the card icon to the trash.
Improper removal can corrupt the data stored on your card. If removed improperly, a warn-
ing message may state that there is a problem with the media and prompt you to check
the disk for data loss.
Dazzle Universal 3 in 1 Reader/Writer User's Guide • Using the Reader/Writer • Page 39