Advertisement
WARNING
Electrical
Shock
Hazard
Unplug power cord from electrical
outlet.
Do not operate
the vacuum
cleaner without the motor safety filter.
Be sure the filter is dry and properly
installed to prevent motor failure
and!or
electrical shock.
ii
,
i
iiiiiii1,11 i ii ...........
MOTOR SAFETY FILTER
ELECTROSTATIC
This filter must be replaced when dirty° It
should be replaced regularly
depending
on
use conditions.
The filter CANNOT
be
washed as it will lose its dust trapping
ability.
NOTE: See PARTS AND FEATURES
for
Motor Safety Filter number°
1. Remove the bag as outlined in the BAG
CHANGING
section
2. Lift the rubber
retainer and pull out
motor safety filter as
shown.
3, Replace the filter,
white side out, facing
the dust bag, by sliding
it back into place under
the ribs in the bag
cavity. Tuck filter in so
that it fits completely
under the rubber
retainer°
4. Replace the bag as outlined in the BAG
CHANGING
section
16
Advertisement
