Advertisement
1. Remove Power_Mate ® cover as shown in
BELT CHANGING
AND AGITATOR
CLEANING
section_
Push in
And
Turn
2, Push in and turn
bulb counterclock-
wise, then pull out
to remove,
_
Push In
And
Turn
3_ Push in and turn
bulb clockwise,
to
replace.
Bulb must
_.
not be higher than
_15
Watts(130
Volts),,
4. Reinstall
Power-Mate e cover as shown in
BELT CHANGING
AND AGITATOR
CLEANING
section.
NOTE: See PARTS AND FEATURES
for
bulb number,
WARNING
Electrical
Shock Or Personal Injury
Hazard
Disconnect
electrical
supply
before
per-
forming
maintenance
to the vacuum
cleaner. Failure to do so could result in
electrical
shock or personal
injury from
vacuum cleaner suddenly
starting.
TO CHECKTHE
BRUSHES
_:z:::__
When brushes
levei of the base
support bars,
replace the
agitator
Base Support
Bars
assembly,
TO REPLACE AGITATOR
ASSEMBLY
1. Remove Power-Mate s cover, belt and
agitator assembly
See "To Remove Belt" in
BELT CHANGING
AND AGITATOR
CLEANING..
2, Replace agitator assembly.
3. Reinstall
belt and Power-Mate®
cover.
See "To replace belt" in BELT CHANGING
AND AGITATOR
CLEANING.
20
Advertisement
