8-19
Periodic Maintenance and Adjustment
Cooling system
1. Place the ATV on a level surface.
2. Check the coolant level in the coolant
reservoir when the engine is cold, as the
coolant
level
will
temperature.
NOTE:
The coolant should be between the minimum
and maximum level marks.
3. If the coolant is at or below the minimum
level mark, remove the reservoir cap. Add
coolant to the maximum level mark, install
the reservoir cap, and then install the panel.
vary
with
engine
1. Coolant reservoir tank cap
2. Maximum level mark
3. Minimum level mark
Coolant reservoir capacity
(up to the maximum level mark):
0.3 L (0.26 Imp qt, 0.32 US qt)