Differential Gear Oil - Coleman POWERSPORTS HS360ATV Owner's Manual

8-17 Periodic Maintenance and Adjustment
9. Install the final gear case cover bolts, and
then tighten them to the specified torque.

Differential gear oil

Checking the differential gear oil
1. Place the ATV on a level surface.
2. Remove the differential gear oil filler bolt
and check the oil level. It should be up to the
brim of the filler hole. If the level is low, add
sufficient oil of the recommended type to
raise it to the specified level.
1. Differential gear oil filler bolt
CAUTION:
Be sure no foreign material enters the
differential gear case.
3. Install the differential gear oil filler bolt, and
tighten to the specified torque.
Tightening torque:
Differential gear oil filler bolt:
23 Nm (2.3m·kgf, 17ft·lbf)
Replacing the differential gear oil
1. Place the ATV on a level surface.
2. Place a container under the differential
gear case to collect the used oil.
3. Remove the differential gear oil filler bolt
and differential gear oil drain bolt to drain