Specifications - Panasonic PT-DZ13KE Operating Instructions Manual

Specifications

The specifications of the projector are as follows.
Power supply
Power consumption
Size
DLP chip Display system
Number of pixels
Lens
Luminous lamp
Light output
*1
Contrast ratio
*1
Color system
Projection screen size
Screen aspect ratio
Projection method
Power cable length
Outer case
Width
Dimensions Height
Depth
Weight
Noise level
*1
Operating
environment
temperature
Operating *4
environment
Operating
environment
humidity
Power supply
Operating range
Remote
control
Weight
Dimensions
*1 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*2 In the portrait setting, the light output is 10 600 lm for PT-DZ13KE and PT-DS12KE, and 9 600 lm for PT-DW11KE.
*3 Average value. Weight varies for each product.
*4 When using the projector at high altitudes (1 400 m (4 593') or higher – lower than 2 700 m (8 858') above sea level), the operating environment
temperature should be between 0 °C (32 °F) and 40 °C (104 °F).
If you use the Smoke cut filter, the operating environment temperature should be between 0 °C (32 °F) and 35 °C (95 °F). However, it cannot be
used at high altitudes.
If you use the Replacement lamp unit (for portrait mode), the operating environment temperature should be between 0 °C (32 °F) and 40 °C
(104 °F) when using the projector at elevations lower than 1 400 m (4 593') above sea level, and between 0 °C (32 °F) and 35 °C (95 °F) when
using the projector at high altitudes. If you use the Smoke cut filter together, the operating environment temperature should be between 0 °C (32 °F)
and 30 °C (86 °F).
If the [PROJECTOR SETUP] menu → [LAMP POWER] is set to [HIGH], [MIDDLE], or [NORMAL], and an ambient temperature reaches 40 °C
(104 °F) or higher (35 °C (95 °F) or higher when [HIGH ALTITUDE MODE] is set to [ON] or the Smoke cut filter is used), the light output may
decrease by approx. 20 % to protect the projector.
180 - ENGLISH
Chapter 6 Appendix — Specifications
AC 220 V - 240 V, 50 Hz/60 Hz
PT-DZ13KE
PT-DS12KE, PT-DW11KE
PT-DZ10KE
0.3 W when [STANDBY MODE] is set to [ECO]
9 W when [STANDBY MODE] is set to [NORMAL]
PT-DZ13KE, PT-DZ10KE
PT-DS12KE
PT-DW11KE
3-unit DLP chips, DLP type
PT-DZ13KE, PT-DZ10KE
PT-DS12KE
PT-DW11KE
Optional
PT-DZ13KE, PT-DS12KE,
PT-DW11KE
PT-DZ10KE
PT-DZ13KE, PT-DS12KE
PT-DW11KE
PT-DZ10KE
10 000:1 (when [DYNAMIC IRIS] is set to [3])
7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
1.78 m (70") to 25.40 m (1 000")
PT-DZ13KE, PT-DZ10KE
PT-DS12KE
PT-DW11KE
[FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR]
3.0 m (118-1/8")
Molded plastic
530 mm (20-7/8")
200 mm (7-7/8") (with legs at shortest position)
548.5 mm (21-19/32") (excluding the lens)
Approx. 24.0 k] (52.9 lbs.)
*3
PT-DZ13KE, PT-DS12KE,
PT-DW11KE
PT-DZ10KE
0 °C (32 °F) to 45 °C (113 °F)
10 % to 80 % (no condensation)
DC 3 V (AA/R6 battery x 2)
Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
134 ] (4.7 ozs.) (including batteries)
Width: 51 mm (2"), Height: 176 mm (6-15/16"), Depth: 28 mm (1-3/32")
970 W (5 A)
950 W (4.8 A)
900 W (4.9 A)
24.4 mm (0.96") (aspect ratio 16:10)
24.1 mm (0.95") (aspect ratio 4:3)
21.6 mm (0.85") (aspect ratio 16:9)
2 304 000 pixels (1 920 x 1 200 dots)
1 470 000 pixels (1 400 x 1 050 dots)
1 049 088 pixels (1 366 x 768 dots)
380 W UHM lamp x 2
355 W UHM lamp x 2
12 000 lm (ANSI)
*2
11 000 lm (ANSI)
*2
10 600 lm (ANSI)
16:10
4:3
16:9
45 dB
43 dB