5)
Use a Phillips screwdriver to firmly tighten the lamp unit fixing screws (x2 each).
f Make sure to attach the lamp unit securely.
6)
Attach the lamp unit cover.
i)
Close the lamp unit cover in Step 2) in the reverse order.
f Attach the lamp unit cover so that the connector of the lamp unit cover is inserted to the fan power connector securely.
ii) Use a Phillips screwdriver to firmly tighten the lamp unit fixing screw (x1).
f Make sure to attach the lamp unit cover securely.
Note
f When you replace the lamp unit with new one, the projector resets the runtime of the lamp unit automatically.
162 - ENGLISH
Chapter 5 Maintenance — Maintenance/replacement