Panasonic PT-DZ13KE Operating Instructions Manual page 126

12) If [CLOCK PHASE] is selected in Step 6), press qw to make adjustment.
13) Press as to select [FRAME LOCK].
14) Press qw to switch the item.
[MAIN WINDOW]
[SUB WINDOW]
15) Press as to select [TYPE].
16) Press qw to switch the item.
[MAIN WINDOW]
[SUB WINDOW]
Note
f The P IN P function may not be available for some signals being input or terminals being selected. Refer to "Two-window display
combination list" (x page 174) for details.
f The main window setting values are applied to image adjustment values such as [PICTURE MODE], [GAMMA], and [COLOR
TEMPERATURE].
f On the main screen (when no menu is displayed), press qw to switch the sizes and positions of the main window and sub window while P
IN P is operating.
f When [FRAME RESPONSE] is set to other than [NORMAL], [P IN P] cannot be set.
f 3D images cannot be displayed in P IN P. (Only for PT-DZ13KE, PT-DS12KE, PT-DW11KE)
f The P IN P state continues while the P IN P function is used, even if 3D images of the simultaneous system are displayed. (Only for
PT-DZ13KE, PT-DS12KE, PT-DW11KE)
126 - ENGLISH
Chapter 4 Settings — [P IN P] menu
Set frame lock to the input signal set in the main window.
Set frame lock to the input signal set in the sub window.
The main window has display priority.
The sub window has display priority.