Controlling an external accessory
If your projector has a 12-volt trigger output port, the projector can automatically control one
or more accessories. Certain types of accessories can use a 12-volt signal to trigger their
actions, such as a motorized screen lowering and raising the screen. The output provides a
12-volt dc signal whenever the projector is on (200 mA maximum current output).
Requires:
•
Two-wire cable with 3.5-mm × 1.3-mm barrel connector (+12 V on inner contact) with the
following specifications.
+12V output electrical specification
Parameter
Output voltage
Output ripple
Maximum output current
Maximum rush current
Maximum rush current duration
46
Installing Permanently
Value
12 +/- 10% V
0.1 Vpp
200 mA
2.0 A
10 ms