Convenient Features; Using The Remote Mouse Function; Connecting To Your Computer For The Remote Mouse Function; When Using The Usb Port - NEC MT1075 User Manual

CONVENIENT FEATURES

Using the Remote Mouse Function

The built-in remote mouse function enables you to operate your
computer's mouse functions from the remote control (Computer mode).
It is a great convenience for clicking through your computer-generated
presentations. To return to the projector operation mode (Projector mode),
press the PJ button (lit red).
Connecting to your computer for the remote mouse
function
If you wish to use the remote mouse function, use the supplied USB
cable to connect the USB port (PC) of the projector and the USB port
(type A) of your computer.
NOTE: Depending on the type of connection or OS installed on your computer,
you may have to restart your computer or change you computer settings.

Switching operation mode between computer and projector

The three shaded buttons shown on the drawing work as a computer mouse in the Computer mode.
In the Computer mode the PJ button is not lit.
Works as a mouse for your computer.
OFF
POWER
VIDEO
AUTO ADJ.
ASPECT
HELP POINTER
VOLUME MAGNIFY
Works as a left-click
ZOOM
button for your com-
puter.
• When the MENU button is pressed, the PJ button lights red to indicate that you are in the Projector mode, which allows the projector menu
operation using the three buttons.
• When the POINTER button is pressed, the PJ button lights red to indicate that you are in the Projector mode and that the SELECT
button works as a moving button for the POINTER or magnified image.
• If no buttons are pressed within 60 seconds, the PJ button's light goes out to indicate that you are in the Computer mode. To enable the projector
menu operation again, press the PJ button to light red. To move the pointer or a magnified image again, turn off the pointer and then turn on the
pointer (press the POINTER button two times).
• When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode (not lit).
During Computer mode:
In Computer mode, by pressing the ENTER button for 2 seconds or more then releasing, the drag mode is set and the drag operation can be
performed simply by pressing the SELECT
CANCEL (right click) button.
ON
RGB VIEWER
LASER
Works as a right-click button
for your computer.
Not lit
FREEZE 3D REFORM
PIC-MUTE
SLIDE
FOCUS FOLDER
SLIDE
LIST
(mouse) button. To drop the item, press the ENTER (left click) button again or press the

When using the USB Port

For PC, the mouse receiver function can only be used with a Windows
98, Windows ME, Windows XP or Windows 2000 operating system.
NOTE: Wait at least 5 seconds after disconnecting the USB cable before recon-
necting it and vice versa. The computer may not identify the built-in mouse re-
ceiver if it is repeatedly connected and disconnected in rapid intervals.
Works as the SELECT button on the projector.
Works as the ENTER
button on the projector.
E-24
USB port (PC)
USB port
(Type A)
OFF ON
POWER
VIDEO RGB VIEWER
AUTO ADJ. LASER
Works as the CANCEL
button on the projector.
Lit red
ASPECT FREEZE 3D REFORM
HELP POINTER PIC-MUTE
VOLUME MAGNIFY SLIDE
ZOOM FOCUS FOLDER
SLIDE
LIST