Fenix BPT-SP Instruction Manual For Installation And Use page 4

DESCRIPTION OF BPT-SP
PLACEMENT AND CHANGING OF BATTERIES
- open the battery case and remove the protective strip; this will make the BPT-SP
device functional
- adhere to the correct polarity which is shown in the space for batteries when changing
the batteries
- when the batteries need to be changed it is indicated on the display by the flashing
symbol
- always use 2 x 1.5 V, type AA alkaline batteries!
!
Dispose of used batteries in accordance with the regulations for the handling of
hazardous waste!
4