Examples Of Use - Fenix BPT-SP Instruction Manual For Installation And Use

!
In order to prevent disturbance and interference to systems, each system is protected by its
own unique code which is factory-set in the BPT-SP control unit!
!
For correct communication to occur amongst all elements of a system with a BPT-SP control
unit, the learning of the code must take place – the ACTIVATION of each element added to the
system!
!
As the whole system operates on the bidirectional radio frequency of
the instructions for the installation and placement of each element of the system according to the
appropriate instructions
THE TRANSMISSIVITY OF THE 433.92 MHz RF SIGNAL THROUGH VARIOUS
Note: The given signal values are only a rough approximation, and will vary
according to the conditions at the location at which the signal is transmitted and
received!

EXAMPLES OF USE

!
MATERIALS
433.92 MHz,
follow
3