MasterForce 241-0315 Operator's Manual
  1. Manuals
  2. Brands
  3. MasterForce Manuals
  4. Drill
  5. 241-0315
  6. Operator's manual
MasterForce 241-0315 Operator's Manual

MasterForce 241-0315 Operator's Manual

12 volt lithium-ion right angle drill
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CAUTION:
Understand The Operator's Manual. Save These Instructions For
Future Reference.
For questions / comments, technical assistance or repair parts –
Please Call Toll Free: 1-866-917-4374. (M-F 8am – 6pm EST.)
12 Volt Lithium-Ion
Right Angle Drill
241-0315
OPERATOR'S MANUAL
To Reduce The Risk Of Injury, User Must Read And

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 241-0315 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MasterForce 241-0315

Summary of Contents for MasterForce 241-0315

  • Page 1 12 Volt Lithium-Ion Right Angle Drill 241-0315 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand The Operator’s Manual. Save These Instructions For Future Reference. For questions / comments, technical assistance or repair parts –...

  • Page 2: Table Of Contents

    TAbLE Of CONTENTS Safety Symbols ............Page 2 Safety Instructions .

  • Page 3: Safety Symbols

    SAfETy SyMbOLS Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. Symbol Designation / Explanation Name Volts Voltage...

  • Page 4: Safety Instructions

    SAfETy INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.

  • Page 5: General Safety Rules

    SAfETy INSTRUCTIONS GENERAL SAfETy RULES 4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from WARNING: Read all safety heat, oil, sharp edges or moving parts. warnings and instructions. failure to Damaged or entangled cords increase the follow the warnings and instructions may risk of electric shock.
  • Page 6 SAfETy INSTRUCTIONS 6. Dress properly. Do not wear loose 6. keep cutting tools sharp and clean. clothing jewelry. Keep your hair, Properly maintained cutting tools with clothing and gloves away from moving sharp cutting edges are less likely to bind parts.
  • Page 7 SAfETy INSTRUCTIONS SPECIfIC SAfETy 9. Release the trigger immediately when screws tightened avoid INSTRUCTIONS fOR RIGHT breaking the screw. ANGLE DRILL 10. for best results, your battery tool should be charged in a location where 1. Use the tool only with the battery the temperature is more that 50°f (10°C) and charger listed below: but less that 104°f (40°C).

  • Page 8: Overview/Specifications

    OVERVIEW Hexagonal chuck Locking sleeve LED worklight Direction-of-rotation selector Variable-speed trigger switch SPECIfICATIONS Motor 12 Volt DC Switch VSR (Variable Speed Reversible) No-Load speed 0-700 RPM Chuck 1/4” (6.35 mm) Maximum torque 120 in-lbs. Drill weight (Without battery) 1 lb. 6 oz. Page 7...

  • Page 9: Assembly

    SPECIfICATIONS 1/4 IN. QUICk CHUCk LED WORkLIGHT Quick and easy bit changes without the The LED worklight, located on the front of need for tools. the right angle drill, illuminates when the trigger switch is depressed. This feature VARIAbLE SPEED provides extra light for increased visibility.

  • Page 10: Operation

    OPERATION TO ATTACH bATTERy PACk TO DETACH bATTERy PACk (fIG. 1) (fIG. 1) CAUTION: When placing the 1. Depress the battery release button battery pack in the tool, be sure that the located on the both sides of the battery raised rib on battery pack aligns with the pack to release battery pack.
  • Page 11 OPERATION DIRECTION-Of-ROTATION ELECTRIC bRAkE SELECTOR (fORWARD/ To stop the right angle drill, release the CENTER LOCk/REVERSE) trigger switch and allow the chuck to come (fIG. 3) to a complete stop. The electric brake quickly stops the chuck from rotating. This feature engages automatically when you FIG.
  • Page 12 OPERATION INSTALLING bITS (fIG. 5) DRILLING (fIG. 6) FIG. 5 FIG. 6 Chuck Locking sleeve When drilling hard, smooth surfaces use 1. Lock the trigger switch by placing a center punch to mark the desired hole the direction of rotation selector in the location.

  • Page 13: Maintenance

    OPERATION DRILLING METAL 2. If the hole to be drilled is fairly large, drill a smaller hole first, then enlarge to the required size, it’s often faster in There are two rules for drilling hard the long run. materials. First, the harder the material, 3.
  • Page 14 NOTES Page 13...

  • Page 15: Warranty

    90-DAy MONEy bACk GUARANTEE: This MASTERFORCE brand power tool carries our 90-DAY Money Back ® Guarantee. If you are not completely satisfied with your MASTERFORCE brand ® power tool for any reason within ninety (90) days from the date of purchase, return...
  • Page 16 © 2013 Menard, Inc., Eau Claire, WI 54703 09/2013 Page 16...

Table of Contents