Videology M14 Board Operation Manual

Operation Manual
M14 Board Lens CS Lens
NTSC PAL NTSC
20E407 20E417 20E409 21E409
21E407 21E417 20E419 20E419

BOX CONTENTS

1. Camera module
2. Connection cable
3. User manual
SAFEGUARDS & WARNINGS
Prior to installation and use of this
product, the following WARNINGS should
only be observed.
1. Installation and servicing should only
be done by Qualified Service and
Installation Personnel.
2. Installation shall be done in accordance
with all local and national electrical and
mechanical codes.
3. Use only installation methods and mate-
rials capable of supporting four (4) times
the maximum specified load.
11/26/08 INS-20E407 Rev E

Camera Settings

Dip Switch 1

Note- "On" Indicates "HI" Position
Function
1 FLICKERLESS
2 BLC
3 M IRIS
4 AE REF
5 AGC MAX
6 AWB1
PAL 7 AWB2
8 AWB3
Note: for DCAI 1, 3, 4 are set ON

White Balance Control

WB AUTO
Auto Enabled
Pt Set Enabled
WB Fixed Mode
Indoor
Fluorescent
Lamp
Outdoor Fixed

Dip Switch 2

Note- "On" Indicates "HI" Position
Function
1 GAMMA
2 AE / ME

Push to Set White balance

The Push to Set White balance (Pt set) may
be implemented by selecting the switch
settings.
Next, focus the camera on a white back-
ground under the lighting that is to provide
illumination for the camera scene.
Push the button labeled "Push Lock White
Balance". The camera White Balance will be
locked and will not change if the scene
changes.
Off On
Off (Default) On
Off On (Default)
Electronic CCD DC Auto Iris
100 IRE (Default) 80 IRE
20dB max 26dB max
(Default)
White Balance Control (see below)
White Balance Control (see below)
White Balance Control (see below)
MODE
Switch 6 Switch 7 Switch 8
AWB1 AWB2 AWB3
Off On Off
Off On On
Switch 7 Switch 8 Color Temp.
AWB2 AWB3
Off Off Approx. 3200K
On Off
Off On Approx. 4200K
On On Approx. 6300K
Off On
1.0 enabled 0.45 enabled
(Default)
ME - Mechanical AE - Auto Exposure
Exposure enabled enabled (Default)

Camera Functions

Connectors and Controls

Lens options vary, but are pre-backfocused
for normal operation. Varifocal lens options
are indicated in model numbers ending in:
VA (4 to 9mm varifocals)
VB (DC Auto Iris 4 to 9mm varifocals)
WA (2.6 to 5.6mm varifocals)
WB (DC Auto Iris 2.6 to 5.6mm varifocals)
Front
DC Iris
ALC
Adjustment

Line Lock

Back
Push Lock White Balance
Dip Switch 1
1 Flickerless
2 BLC
3 M Iris
4 AE Ref
5 AGC Max
6 AWB 1
7 AWB 2
8 AWB 3
Dip Switch 2
1 Gamma
2 AE/ME
Video GND 12VDC

Power Board Controls

An optional 24VAC power board is avail-
able.
Note: Line lock is included with this
camera