Rotatable Badge - Tannoy arena Highline 500 LCR Owner's Manual

ROTATAblE bADGE
The Arena HighLine 500LCR is designed to be used either horizontally (e.g.
centre channel) or vertically (e.g. wall or stand mounted satellite position).
The Tannoy badge on the speaker has been designed to swivel to the
required position for horizontal or vertical use. In horizontal position the
badge can appear either to the right or left hand side of the speaker and
in vertical position the badge can appear either to the top or bottom of the
speaker. The badge has a spring mechanism which holds it locked in its
finally chosen position at 90 degree intervals. To swivel the badge through
90 degrees it needs to be carefully lifted away from the grille by approx
2 - 3 millimetres (approx 0.1") only and then turn to the desired position.
To pull the badge upwards it should be gripped with finger nails to either
side and slightly underneath.
• Grip with finger nails to either side of badge and gently pull
(approx 2 – 3mm / 0.1" only)
• Swivel to desired position
• Allow spring mechanism to hold in final position
3 5