Cisco 8961 User Manual page 48

Handset Rest
Your system administrator may have mounted your phone on a wall. With a wall-mounted phone, you
may need to adjust the handset rest to ensure that the receiver does not slip out of the cradle.
1
Remove the handset from the cradle and pull the plastic tab from the handset rest.
1
Rotate the tab 180 degrees.
2
Hold the tab between two fingers, with the corner notches facing you.
3
Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension
4
protrudes from the top of the rotated tab. Return the handset to the handset rest.
48
2 3 4
OL-23119-01