Chapter 10 Maintenance And Troubleshooting; Cleaning The P-2000; Troubleshooting; Error Messages/Icons - Epson Viewer P-2000 User Manual

Chapter 10
Maintenance and Troubleshooting

Cleaning the P-2000

To keep your P-2000 operating at its best, you should
clean it thoroughly several times a year. Before you
perform any maintenance on P-2000, be sure to read
the "Important Safety Instructions" on page 2. Then
follow these guidelines.
❏
Be sure to turn P-2000 off before cleaning.
❏
Use a clean, dry cloth to keep P-2000 free of dust.
❏
Do not use harsh or abrasive cleaners.
❏
If necessary, clean the battery contacts with a dry
cloth.

Troubleshooting

When a problem occurs, an error message or icon
usually appears in the LCD. Refer to the following
section to solve the problem.

Error messages/Icons

Error message/Icon
A file access error has occurred.
Do not eject the memory card if it
is being accessed.
An error occurred while verifying.
Files will not be deleted.
Some errors occurred while
copying. Copying was canceled.
Some errors occurred while
deleting files. The operation was
canceled.
Maintenance and Troubleshooting
Description
Wait until the Access lamp turns
off, and reinsert the memory card
and try again.
Some files failed to be deleted.
Check the data.
Some files were skipped, the
memory card may be
write-protected. Check the
memory card and try again.
Some files were skipped, the
memory card may be
write-protected. Check the
memory card and try again.
61
10
10
10
10
10
10
10
10
10
10