Turning The Power On - Epson Viewer P-2000 User Manual

c
Caution:
❏
Remove the AC adapter if it is connected to
P-2000.
❏
Never remove the battery while P-2000 is
turned on. Doing so may cause data in the
card or HDD to be lost or damaged.
2. Open the battery cover.
3. Push the catch down.
The battery is pushed out.
14
Getting Started
4. Pull out the battery. Then close the battery cover.
w
Warning:
Do not carry loose batteries in your pockets.

Turning the power on

Slide the power switch to
power switch will return to the original position.
illumination
lamp
The illumination lamp turns on.
as shown below. The