Chapter 8 Customizing Settings; Changing The P-2000 Settings - Epson Viewer P-2000 User Manual

Chapter 8
Customizing Settings
This section describes how to customize P-2000
settings. You can customize various settings for
displaying and copying images, or turn on the sound
setting to make your P-2000 more fun to use.

Changing the P-2000 Settings

The settings described in the following sections can be
changed from the Settings menu. To display the
Settings menu, select Settings in the Home screen and
press the OK button.
Settings
LCD Brightness
Slide Show
Power Save
NTSC
Video Out
PAL
Language
Volume
Copy Mode
Display
Date and time
Hard Drive
The following table shows details of each setting.
LCD Brightness LCD
setting Brightness
Volume settings Operation
Sound
Volume
Slide Show Effect
settings
BGM
Duration
Customizing Settings
Change the brightness of the LCD.
Select an appropriate brightness
by using the Right or Left button.
When this setting is set to ON, a
beep sounds when you do some
operations.
You can set the volume for playing
audio and video.
Select one of the five slide show
effects. The slide show is executed
with the selected effect.
Select the BGM which is played
during the slide show. You can
select None, one of the five default
audio, or audio data in the same
folder.
Set the duration to switch the
images during a slide show. You
can set the duration by moving the
slidebar from 3 seconds to 30
minutes.
55
8
8
8
8
8
8
8
8
8
8