HEATING CAPACITY - With High Efficiency Motor Furnaces
UNIT
MODEL
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*D20
T*9(C,V)*D20
YHJF60S41S1
Y*(8,L)C*C20
Y*(8,L)C*C20
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping
and no supplemental electric heat operation.
3. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
* Notates "Hot Heat Pump" performance. These ratings are not AHRI Listed.
COP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input
during the same period.
— = Not Applicable.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.