For Safe Use - Optex SS Checker SC-T4 Instruction Manual

The Contents of Packaging
Transmitter
2 Transmitter Fixing Screw
20 Y-terminal
In the unlikely event that there are any missing components or defects,
please contact your dealer.
Mounting Bracket
Transmitter
SC-T4
Instruction Manual
Thank you very much for purchasing OPTEX
Transmitter SC-T4.
All of this instruction manual must be read before
operation of the Transmitter SC-T4, for safe and
proper operation.
This instruction manual should be kept for future
reference such as maintenance.
Instruction Manual
1

For safe use

[ Be sure to read this instruction manual in order
to use the Transmitter SC - T4 properly.]
Please thoroughly read the "For safe use" before using the SC-T4
properly.
Because these precautions are related to failure or malfunction,
observe the precautions for use without fail.
The SC - T4 is used exclusively to SS Checker ( Detector ) .
Accordingly, do not connect other equipment.
In order to use the SC-T4 properly,
observe the following precautions.
Precautions which are the cause of failure
Precautions related to measurement
Precautions which are the cause of failure:
" " denotes "Prohibited action", and "
Power ( OFF )
Turn off the Power immediately n the
unlikely event that there occur any
abnormalities such as smoke or
abnormal noise. Otherwise it may
cause fire or an electric shock.
" denotes "Required action".
Do not disassemble or modify the
Transmitter. Disassembly
modification may cause fire or an
electric shock because there are high-
voltage parts inside the Transmitter.
or