Table of Contents
Advertisement
Modes of Operation - Continued
With switch 1 in the Menu Mode or Open position, there are three modes available
to you. They are as follows:
The structure for these menus is shown in Figure 3. The following page is specific information
about each mode and following that are the step-by-step instructions for accessing them.
The 6720 remote display is used for weight only, the ZERO and TEST keys are inoperable
when the internal display is in use. Dip switch 3 select internal or external display keypad
operation.
Top view of 6720 scale with platter removed
Diagnostic Mode - used to test areas of the scale's function
Configuration Mode - used to configure your scale for your application
Calibration Mode - used when calibrating the scale
- Internal & External Display Selection -
Figure 2
6720 Switch Location
3
Advertisement
Table of Contents
