Save These Instructions - GE LP 33U Series Operating Manual

50 & 60 kva

Hide thumbs

Table Of Contents

Table of Contents

This manual contains important instructions for models LP 33U Series / 50 & 60 kVA that should

be followed during installation and maintenance of the UPS and battery.

Move the UPS in an upright position in its original package to the final destination

room.

Check for sufficient floor and elevator loading capacity.

Check the integrity of the UPS equipment carefully.

If you notice visible damage, do not install or start the UPS. Contact the nearest Service

Center immediately.

WARNING! RISK OF ELECTRICAL SHOCK: Do not remove covers; there are no user

serviceable parts inside.

After switching off takes 5 minutes for the DC capacitors to discharge because a

lethally high voltage remains at the terminals of the electrolytic capacitors.

All maintenance and service work should be performed by qualified service personnel.

The UPS contains its own energy source (battery).

The field-wiring terminals may be electrically live, even when the UPS is disconnected

from the utility.

Dangerous voltages may be present during battery operation.

The battery must be disconnected during maintenance or service work.

This UPS contains potentially hazardous voltages.

Be aware that the inverter can restart automatically after the utility voltage is restored.

Store the UPS in a dry location; storage temperature must be within -13°F (-25°C) to

131°F (55°C).

If the unit is stored for a period exceeding 3 months, the battery must be recharged

periodically (time depending on storage temperature).

The battery-voltage is dangerous for person's safety.

When replacing the battery, use the same cells number, voltage (V), capacity (Ah).

All the battery used, shall be of the same manufacturer and date of production.

Proper disposal or recycling of the battery is required.

Refer to your local codes for disposal requirements.

Never dispose of battery in a fire: They may explode.

Do not open or mutilate battery: Their contents (electrolyte) may be extremely toxic.

If exposed to electrolyte, wash immediately with plenty of water.

Avoid charging in a sealed container.

Never short circuit battery. When working with battery, remove watches, rings or other

metal objects, and only use insulated tools.

In case of air shipment, the cables +/- going to the battery fuses/terminals shall be

disconnected and isolated.

Modifications reserved

OPM_LPS_3UO_50K_60K_1US_V010.doc