GE LP 33U Series Operating Manual page 27

Home\Meter
UTILITY
f
L1
L2
L3
BYPASS FREE
Home\Meter
INVERTER
f
L1
L2
L3
T
SYNCHRONIZED
Home\Meter
MODULE LOAD
L1 : 120 V
L2 : 120 V
L3 : 120 V
LOAD ON INVERTER
Home\Meter
COUNTERS
Bypass utility failure
Rectifier utility failure
Overloads
InvOperTime [h]
UPSOperTime [h]
Home\Meter
UTILITY
NUMBER OF FAST TRANSIENTS
<2ms >2ms
25 20
ECO MODE RATE
Modifications reserved
OPM_LPS_3UO_50K_60K_1US_V010.doc
Bypass utility data screen
f
60 Hz
120 V
L1
120 V
L2
120 V
L3
Bypass
Inverter data screen
f
60 Hz
L1
120 V L2
120 V L3
120 V
T
OK
The synchronization status of the inverter with respect to
utility (Synchronized / Not Synchronized).
Module load screen
... V
56.0 A 50 %
... A
56.0 A 50 %
56.0 A 50 %
... %
The source of the power supplied to the load.
Statistics screen
The total number of minor utility faults (bypass utility out of
tolerance faults).
: 53
The total number of times a gap of utility in the rectifier has
: 35
been reordered.
: 15
: 2135
The total number of detected output overloads.
: 3125
The total operating time for the Inverter (in hours).
The total operating time for the UPS (in hours).
ECO Mode statistic screen
This screen is enabled only for a single UPS, not for an RPA
>5ms >10ms
Parallel System.
7 5
The number of fast transients occurred on the bypass
utility on the last seven days.
= 70 %
The statistic evaluation in % (100= good; 0= bad) of the
utility, for the ECO mode operation.
The frequency of the utility.
3-phase utility voltage PHASE /NEUTRAL.
Bypass status: FREE / LOCKED.
The output frequency of the Inverter.
3-phase output voltage PHASE/NEUTRAL.
The temperature of the inverter bridge (OK / MAX).
Output voltage PHASE/NEUTRAL for each phase.
The output current as RMS values (RPA: value for
each UPS).
The output load as percentage (RPA: value for each
UPS).
Page 27/65
Operating Manual LP 33U Series 30 & 40 kVA