Table of Contents
Advertisement
Mode Screen
Use the Mode link on the main menu to reach the Mode screen. An example screen is
shown below.
Data - Mode Screen
Device Mode
This field displays the current name of this device.
Device Name
Subnet Mask
The default value 255.255.255.0 is standard for small (class "C")
networks. For other networks, use the Subnet Mask for the LAN
segment to which the WBR-3407 is attached (the same value as
the PCs on that LAN segment).
Device Mode
Select the desired device mode for the router:
•
•
Select the desired language for this user interface.
Language
Notes:
•
Generally, you should NOT use modem mode. Only select this mode if you are
sure this is what you want.
•
After changing the mode, this device will restart, which will take a few seconds.
The menu will also change, depending on the mode you are in.
•
For details on using Modem Mode, see Chapter 8.
Figure 6: Mode Screen
Router - Both the ADSL Modem and the Router features are
operational. In this mode, this device can provide shared
Internet Access to all your LAN users.
Modem - Only the ADSL Modem component is operational.
All Router features are disabled. This device is "transparent"
- it does not perform any operations or make any changes to
the network traffic passing through it.
Setup
13
Advertisement
Table of Contents
