Event - Eyemax HX-04 User Manual

3) Event

You can specify the processing when event occurs like sensor, motion detection, video loss, event
filters, and schedule.
①
②
③
④
⑤
⑥
⑦
① [Device]
You can set enable or disable sensor, alarm, and alert.
A. Sensor no.: Select sensor no. (1 ~ 4)
B. Activate sensor: Check if you want to enable the sensor.
C. Type : Specify the sensor type is "N.O." or "N.C.".
i. N.O.(Normal Open): The type of input device is opened normally.
ii. N.C.(Normal Close): The type of output device is closed normally.
D. Activate alarm: Check if you want to use alarm when event occurs.
E. Latency time: Setting the duration time of alarm output from event occurs. (1~10
Sec., OFF)
F. Activate alert: Setting sound a buzzer when event occurs from input device.
(On/Off)
G. Latency time: Setting the duration time of buzzer sound from event occurs. (1~10
Sec., OFF)
37
U ' M
SER S ANUAL
H.264 R T DVR
EAL IME