Eyemax HX-04 User Manual page 25

6)[system information]
a. Model: It displays the name of model.
b. Language: It displays language currently set.
c. IP address: It displays IP address.
d. MAC address: It displays MAC address.
e. F/W version: It displays the version number of firmware.
f. OS version: It displays the version number of OS.
g. Video type: It displays video input/output signal type of NTSC or PAL. When video
input comes in, it will be automatically detected and cannot be set by user.
h. HDD capacity: It displays the capacity of hard disk and current utilization ratio.
i. HDD status: It displays the status of HDD, which is shown "Good" or "Error"
according to the status of HDD. If you want to use 2HDD, you can put extra SATA or
e-SATA port
7) [Log out] --- please go to 2-1
You can log out of the system
8)[Time bar]
It shows current time of DVR
9)[Screen Division]
It shows screen division, if you want to see screen division, you should
Click the icon.
4ch -
8ch -
2) shut down
you can see 1,4 channel division.
you can see 1,4,6,9 channel division.
25
U ' M
SER S ANUAL
H.264 R T DVR
EAL IME