CHANGING THE FORMS TEAR-OFF SETTING
The default setting for Forms Tear-Off is OFF.
1
2
To change the Forms Tear-Off setting:
1.
Press SHIFT (2) + SEL (1).
2.
Press GROUP (3) repeatedly until the Rear Feed or Bottom Feed
group shows in the first column of the printed line, depending
on which paper feed you are using,
3.
Press ITEM (4) repeatedly until Form Tear-Off appears in the
second column:
Rear Feed
4.
Press SET (5) until the time interval you wish to select appears
in the third column:
Rear Feed
5.
Press SHIFT (2) + SEL (1) to exit Menu Mode and save the
setting.
MANUAL FORMS TEAR-OFF
If you don't wish to engage the Forms Tear-Off feature, you can
advance:
rear-feed continuous forms loaded on the built-in tractor
l
or
bottom-feed continuous forms loaded on the optional push
l
tractor
up to the tear-off position manually, by pressing TEAR (5).
3
4
Form Tear-Off
Form Tear-Off
USING YOUR PRINTER > 20
5
6
7
Off
1 Sec