Accessories; Care Of Microphones; Accessories Available - DPA 4041-S User Manual

accessories

accessories included 4041-s, 4041-T2 & 4041-sP
Modular Microphone Preamplifiers
MMP4000-S Solid State Preamplifier for MMC404 1, 1 30 V (Only 4041-S)
MMP4000-T2 Tube Preamplifier for MMC404 1, 1 30 V (Only 404 1-T2)
MMP4000-SP Solid State Preamplifier for MMC404 1, P48 (Only 4041-SP)
Modular Microphone Capsule
MMC4041 Large Diaphragm Capsule
Microphone Holder
UA0961 Microphone Holder

accessories available

Modular Microphone Preamplifiers
MMP4000-S Solid State Preamplifier for 404 1, 1 30 V
MMP4000-T2 Tube Preamplifier for MMC404 1, 1 30 V
MMP4000-SP Solid State Preamplifier for MMC404 1, P48
shock Mount
UA0897 Shock Mount
Microphone Holder
UA0639 Microphone Clip
stereo accessories
UA0836 Stereo Boom with Holders
UA0837 Stereo Boom excluding Holders
Windscreen
DUA0090 Pop filter
Cables
DAO4110 DAO4110, Microphone Cable for 4041-S/-T2, 10 m (32 . 8 ft)
AO0182 P48 Microphone Cable, 5 m (16 . 4 ft)
Connection adapter
HTP4000 Converter: 130 V to P48
10

Care of Microphones

It is important to bear in mind
the following points with regards
to mounting and microphone
care:
The Pop filter DUA0090 is fitted
between the microphone stand
and the microphone holder .
The UA0897 Shock Mount is
mounted on the pop filter base .
Use the counter screw to posi-
tion the shock mount correctly .
Assemble the cartridge and premplifier modules of your choice . Assemble the mod-
ules using finger torque only (see below) . When detaching or attaching the cartridge
MMC4041 from the microphone preamplifier, the cable must be disconnected .
Do not try to attach the micro-
phone cartridge MMC4041 to
any microphone preamplifier that
is not specifically designed for
this purpose .
Do not try to attach the
microphone preamplifiers
MMP4000-S, MMP4000-T2 or
MMP4000-SP to any micro-
phone cartridge that is not
specifically designed for this
purpose . Change the cartridge by unscrewing it from
the preamplifier using finger torque only .
Use of windscreen is recommended when microphones are used in dirty or dusty
environments . When not in use, the microphone should be disconnected and kept in the
case supplied .
11