small nut and bolt are in line. Insert the bolt through the holes and screw on the nut. Do not
fully tighten at this stage.
Push the grille retaining clips into position ensuring that they engage correctly on the rim
of the grille.
Fully tighten the small nut and bolt that passes through the rim of the grille.
Place your fan on a level and dry surface.
Plug the power cord into a standard 120V AC, 60HZ outlet. Please make sure the
Selector (Speed Control) is in the OFF position. Select the desired speed setting. There are
4 settings – 0 (off), 1 (low), 2 (medium) and 3 (high).
The fan can be set to oscillate by pushing Oscillating Knob downwards. To stop the
oscillating feature, pull up the Oscillation Knob.
To adjust the tilt angle of fan head, loosen the neck screw, swivel the fan to the desired
angle and then re-tighten the screw.
CAUTION: The fan should always be switched off when making this adjustment.
USE & CARE ASSISTANCE
If you have safety, operation or maintenance questions concerning the use of this product, call
the following customer assistance number: 1-886-877-1889, or send an email to the following
- 5 -