Operation Instructions - Kenmore 127. 32217310 Use & Care Manual

OPERATION INSTRUCTIONS

1. Set your fan on a level and dry surface.
2. Make sure the rotary switch is at "0" (OFF) position. Plug the unit into a 120V AC 60Hz
outlet.
3. Adjust the fan head vertically to your desired angle.
4. To run on the unit, turn the rotary switch to "1" (LOW), "2" (MEDIUM) or "3" (HIGH)
position.
5. To stop the unit, turn the rotary switch to "0" (OFF) position, then unplug the unit from
power outlet.
6. Unplug the product from the electrical outlet when it is not in use or is left unattended.
USE & CARE ASSISTANCE
If you have safety, operation or maintenance questions concerning the use of this product, call
the following customer assistance number: 1-886-877-1889, or send an email to the following
address: Service@collinsinternational.com.
- 5 -