Razor Pocket Mod Troubleshooting Manual page 3

Issue
Chain Keeps Coming Off
Brakes Do Not Work Properly
Power Stays On When Unit
Is Turned Off
Product Makes 'Grinding' Noise
12/21/2006
POCKET MOD Electric Scooter Troubleshooting Guide
Symptom(s)
Sprocket on rear wheel is aligned properly
Remove battery/motor cover to
check for loose connection(s)
Unit does not stop when
brakes are applied
around the brake lever(s)
Check brake cable(s) for damage
Throttle lights stay on when power Double check the power switch
switch is turned off
rubbing against the rear wheel
Unit makes grinding noise
when in use
Lift rear end up & manually
Unit runs, but rear wheel
barely moves
Should spin 3-4 times w/no resistance
Turn power off & manually turn gear on
motor shaft with your fingers
Chain does not rotate freely
Turn power switch off; remove chain from
turn power on & apply throttle
Troubleshoot
Check chain tension Chain is too loose/too tight
Rear wheel out of alignment
with gear on motor shaft
Gear on motor shaft is bent
Inspect chain tensioner Chain tensioner broken
Loose connection(s)
Check for loose wire(s)
Power switch is in off position
is in the off position
Check that brake is not
Brakes are rubbing
Dirt & debris found in chain and/or chain
Inspect chain
Chain tension too tight
spin rear wheel forward Wheel does not spin freely
Gear on motor shaft is tight
Does not turn easily
Still makes grinding noise
rear wheel;
No grinding noise
Result(s) Possible Solution(s)
Adjust chain
Adjust rear wheel
(Refer to Pg 5 in Owner's Manual)
Replace Motor
Replace Chain Tensioner
Reconnect Loose Connection(s)
Wire(s) loose Replace Brake Lever
Cable damaged Replace Brake Lever
Replace Power Switch
Adjust brakes
Pg 4 in Owner's Manual)
Remove any dirt/debris from chain.
is dry Lubricate chain w/WD40®
Adjust chain
Replace Rear Wheel
Replace Motor
Replace Motor
Replace Rear Wheel
(Refer to
3