Lindemann 830 Owner's Manual page 10

SYSCOM
SYSCOM allows you to network several 800 Series components (Link mode). It
provides central control of switch-on and the display functions and allows the
system preamplifier to access the digital inputs on the 820 CD/SACD player. To
use this facility, you must be using the appropriate power amplifiers or CD/SACD
player. Please ensure that all system components are switched off before
changing any SYSCOM connections. Use only the SYSCOM cables supplied. Do
not use any other type of cable, as this could damage your equipment! If you
need longer SYSCOM cables, please contact Lindemann audiotechnik directly
(see back page for contact details) or your dealer. You will find a detailed
description of all Link Mode functions in the Link Mode section of this manual.
820 analog supply
This 15-pole SUB D port supplies power to the D/A converter in the 820 SACD
player and must not be used for any other purpose. Make sure both components
are switched off before attempting to connect this port to the 820 SACD player.
The power supply built into the 830 replaces the 800 Analog Filter Supply
normally used with the 820.
Phono analog supply
The 830 is equipped with a power supply for the optional fully balanced phono
preamplifier. Only connect the phono preamplifier to the 830 when the 830 is
switched off. The phono preamplifier should be connected to Input 1.
830 Stereo Control Amplifier
10