Figure 2-17. Removing The Esd Shield - HP Omnibook XE4400 Service Manual

Reassembly Notes
Caution
Use care when handling the antenna PCA cable. Damaging the cable can degrade notebook
performance.
• Make sure you route the antenna PCA cable through the opening in the ESD shield.
• Replace the OOD guide first, and then make sure the notch in the ESD shield slides into the
corresponding opening in the OOD guide.
• Use care when replacing the ESD shield to avoid damaging the USB port.
2-30 Removal and Replacement
Standoffs (4)

Figure 2-17. Removing the ESD Shield

Screw,
M2.5×6mm (2)
HP Omnibook XE4400