Removing The Keyboard Cover/Speaker Assembly (User-Replaceable) - HP Omnibook XE4400 Service Manual

Removing the Keyboard Cover/Speaker Assembly
(User-Replaceable)
Required Equipment
• Small Phillips screwdriver.
• Small flat-blade screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and then remove the battery.
2. Remove the two screws that secure the keyboard cover/speaker assembly to the rear of the
notebook.
3. Carefully insert a flat-blade screwdriver blade under the keyboard cover/speaker assembly near the
right end, and then gently pry up the center.
4. Carefully remove the keyboard cover/speaker assembly connector from the motherboard.
Caution
Be careful not to damage the antenna PCA that is connected to the left and right display assembly
hinges. Damaging either antenna PCA can degrade notebook performance.
Reassembly Notes
• If necessary, install a new label.
• Insert the tabs of the keyboard cover/speaker assembly into the mating slots under the keyboard,
and then press it into place.
HP Omnibook XE4400 Removal and Replacement 2-11